Actually this is all is done by
Engineering Mode , By the help of this Function we can change some functions of
our mobile hardware, so we change 3g range to 4G Range so our mobile get also
4g signal and we can use 4G sim in 3G android mobile phones. So guys are you
ready to make your 3g mobile to 4G mobile then just take your 3g enabled
android device and Follow below steps.
How to use 4g sim in 3g android mobile phones in Mediatek Chipset
Processor
If your device is used mediatek chipset processor then follow
below steps to use 4g sim in 3g android mobile phones.
1.
Now Download Mtk Engineering Mode app in
your mediatek android device.
2.
Install and Open it , and click on Mtk Settings.
3.
It will redirect to Engineering mode of your android.
4.
Now scroll down , And click on “Network selecting/Preferred
Network” Option.
5.
You”ll see many network mode , Just select 4g From it.
6.
Now insert 4g sim in 1st slot and restart your device.
7. you “ll
get 4g signal in your 3g handset.
How to use 4G sim in 3g android mobile phones in Qualcomm Chipset
Processor Devices
If you get Qualcomm Chipset Processor Devices logo then follow
below steps –
1.
For open Engineering mode in qualcomm chipset processor device
you need to downloadShortcut Master Lite app.
2.
Install and open it , Click on menu.
3.
And search this Keywords “Service Menu” Or “Engineering Mode”.
4.
Once you got Engineering Mode Change Lte bands.
5.
If you are not able to see these options then you need to Dial
*#2263# then Select Menu and Click Back again then Select Menu.
6.
Now go to Key Input and Enter “0000”, Select UE Setting from
Popup.
7.
Set this Configure Protocol>NAS>Network Control>Band
Selection>LTE Band> Then Select “Band 40”.
8. Now use
4g sim in 1st slot to get signal.
Using Xorware 2g/3g/4g Network Mode Interface App
This is Very simple method to Use 4g sim in 3g Android Mobile
phones. By this app You can Make your 3g device to 4g But you need Rooted
Device with Installed Xposed Framework. Because this is Xposed Module to make
4g Interface in 3g Mobile phones.
1.
Install This Two Applications Xorware Network Mode Switcher and Xorware Interface app.
2.
After successfully Install , Open Interface app.
3.
In Network Settings , Select Network Mode to 4G Lte.
4.
Save and apply setting, restart Your android phone.
5.
Done Insert Jio 4g Sim in 1st Slot and Turn On Your device.
6. You get
4G signal in your Sim.
How to use 4g sim in 3g android mobile phones in Moto G and their
Series phones
1.
Open dialer and enter this Ussd code *#*#4636#*#* to open engineering mode.
2.
Click on Phone Information.
3.
Scroll down and select “Set Preferred Network Type” >>
Then select “LTE/GSM auto” Option.
4.
Done ! You get 4g signal in 1st slot.
EmoticonEmoticon